Firmware iphone 2.2 - Installation

January 12, 2009 | In the category of 2.xx, System

This instruction describes the process of changing the firmware to version 2.2. For razlochennyh phone 2G and 3G.
To formally acquired in Russia 3G enough to make dzheylbreyk, then skip to step 3.

If all instruments are assembled that the process takes 10-15 minutes, nothing special, not harder than to install a program on your computer. The reasons for which may come out your iPhone can be caused by

1. Not properly downloaded firmware files or programs.
2. No correspondence file.
3. The differential voltage at the time of updating programs
4. Stuck at the computer working with iphone

Therefore, check all components before launch. It is desirable to use a block of uninterrupted power supply, or a laptop with a fully charged battery. And stable operating system Microsoft Windows XP Service Pack installed Microsoft.NET Framework 3.5.
All known problems are described at the end.

Important! Before you start QuickPwn quit all applications. If you have installed anti-virus, disable it! All actions with firmware done under the administrator profile.

Tools:

Update your iTunes to the latest version. (currently 8.0.2)
Download and unzip the QuickPwn 2.2-1.
Download and unzip butloudery (for iPhone 3G model is not necessary)
Download the 2.2 firmware.
For iPhone 2G iPhone1, 1_2.2_Restore.ipsw
For iPhone 3G iPhone1, 2_2.2_Restore.ipsw

Process:

1) Open iTunes and connect iPhone to your computer.
2) Press the SHIFT key on your keyboard and click "Restore" in iTunes. A dialog box, select the downloaded file original firmware 2.2. You can simply click "Restore" in this case, iTunes is to download the latest version of firmware.
Will begin the process of firmware iPhone. Upon completion, close iTunes.

s1 Прошивка iphone 2.2 - Инструкция

ph1 Прошивка iphone 2.2 - Инструкцияph11 Прошивка iphone 2.2 - Инструкция

3) Run QuickPwn. The program will find your iPhone, itself recognizes the type of phone.

s2 Прошивка iphone 2.2 - Инструкция

Click Browse .. and then downloaded the original firmware, as is the case with iTunes.

s3 Прошивка iphone 2.2 - Инструкция

4) In the window that appears, select «Add Cydia», «Add Installer» and «Unlock phone». For iPhone 3G, para «Unlock phone» will not be available. Click Next.

s4 Прошивка iphone 2.2 - Инструкция

5) In the «Bootloaders» the path to the downloaded butlouderam 3.9 and 4.6. For iPhone 3G, skip this paragraph. Click Next.

s5 Прошивка iphone 2.2 - Инструкция

6) Next zhmete in the blue box with an arrow.

s6 Прошивка iphone 2.2 - Инструкция

7) Now you need to translate the iPhone in DFU mode. Keep an eye on the activity of the lines in a box and do what is written:

1 line - the program converts the body of «recovery mode» (lace and drive on-screen iPhone)
Line 2 - Press and hold the round button «Home» on the front panel of the phone.
3 line - Continuing to hold down the button «Home» Press and hold "Power" - at the top end. (Hold 2 button is pressed -10 seconds)
4 line - Keep only the button «Home», release the "Power". Display the long.
5 line - starts dzheylbreyk. Let go of everything.

ph2 Прошивка iphone 2.2 - Инструкцияph3 Прошивка iphone 2.2 - Инструкция

ph4 Прошивка iphone 2.2 - Инструкцияph11 Прошивка iphone 2.2 - Инструкцияs7 Прошивка iphone 2.2 - Инструкция

If the first attempt did not succeed, do not despair, the program you propose to do it again.

6) Once the iPhone in DFU mode the program will begin the process of dzheylbreyka.
After successful completion of the wait for downloading iPhone.

s8 Прошивка iphone 2.2 - Инструкция

7) After the Jailbreak will begin its work BootNeuter. Do not disconnect the phone. Wait until the process is finished, your phone will reboot and you will see the usual intro to standby.

ph5 Прошивка iphone 2.2 - Инструкцияph11 Прошивка iphone 2.2 - Инструкция

Possible errors

If the last step in the program QuickPwp gives the message "Wait while your Phone is perpared for jailbreaking" and for a long time (a minute or more), nothing happens, probably failed in the process of Jailbreak or any program components are working properly.

Methods of treatment.
All actions with firmware done under the administrator profile.
Check the framework, a better reinstall version 3.5.
Connect your iPhone to another port USB.
Reload Telephone (Home buttons simultaneously squeeze on and off until you restart) the phone. Look at the icon pnp devices, which will appear in the tray. If the device is specified correctly, then follow the instructions QuickPwp.

If, after dzheylbreyka your phone does not see the network.

For 3G official.
After you upgrade or restore the firmware, do not disconnect the phone from the computer, wait for the phone activation in iTunes. (He sees the network)
See also another solution to the problem if the iphone does not see the network.

For the 2G you will need a Wi-Fi
After configuring Wi-Fi, go to Cydia and update it.
After you upgrade install Utilities BootNeuter.
Quit Cydia and run BootNeuter,
The program itself will include the required Boot, then the phone goes to restart itself.
After rebooting again, run and turn BootNeuter Neuter, FakeBlank and Unlock and more, click Flash.
Phone messages and gives two long twists Romashka (about 4-5 minutes), then reboot and the phone sees the network.

Discussion

66 Comments to "firmware iphone 2.2 - Instruction"

  1. Aleksandr - January 12, 2009 23:52

    I have after the upgrade can not install any software. He writes that he could not verify. What is this dzheylbreyk a pancake! Who is to blame and what should I do?

    [Send response]

    admin Reply:

    change MobileInstallation http://www.iphone-gps.ru/ipa/ or install Installous
    http://www.iphone-gps.ru/2008/10/23/hacks/

    [Send response]

    Alexander Reply:

    Updated))! Thank you very much!

    [Send response]

  2. Sahs - January 14, 2009 14:57

    In the first stage, during the installation of the original firmware 2.2 iTunes gave the message that the mobile network is not supported and asked, insert the Sim-card mobile operator supports iPhone. Original Sim-card podrukoy was not, as a result - iPhone requests supported Sim-card and computer. the phone is not seen!
    How to be ...??? more???

    [Send response]

    admin Reply:

    To do this, and it QuickPwn. Proshivaytes and do Unlock.

    [Send response]

  3. Sash - January 14, 2009 18:57

    Thank you, everything turned out!

    [Send response]

  4. Alenka - January 16, 2009 0:29

    thank you for this! I much it helped!
    ATP
    I have a 3 g

    [Send response]

    Sasha Reply:

    What is it? Why?

    [Send response]

  5. sidney3172 - January 17, 2009 21:02

    Link to butloadery bitaya, I thank you!

    [Send response]

  6. Valery - January 18, 2009 16:39

    Get everything you need, unpacks QuickPwn, run, nezapuskaetsya, kakayato mistake! What should I do?

    [Send response]

    admin Reply:

    put Framework 3.5

    [Send response]

  7. MK - 20 January, 2009 19:42

    Shil Ayfon QuickPwn22-1 eventually came to wait for 2 minutes, I waited, waited waited nothing then discovered that I have 2 programs open QuickPwn22-1 and one has decided to close shut and they both closed down: (((and waited, waited but nothing % (((reboot the phone and he draws me an apple and nothing QuickPwn22-1 did not see that I do, by helping

    [Send response]

    admin Reply:

    Do all of the new. Phone in DFU mode and proshivaytes again. Although, after the firmware upgrade via iTunes you must have a working phone. Only without Cydia and Instaler.

    [Send response]

  8. Aleart - January 21, 2009 4:10

    I with 2.1. Do not see the network. Vostanavil on a new without dzheylbreyka, Aytyuns writes - "Unable to connect to iTunesStore. Make sure your network connection to the Internet works. What should I do? Iphone 3G, Ofiialny

    [Send response]

  9. Dmitry - January 21, 2009 5:06

    Depends on the apple and all!

    [Send response]

  10. Galym - January 21, 2009 15:29

    Hello all,

    Thank you, I could go to 2.2, but do it for the first time and even a beginner!

    [Send response]

  11. Yaroslav_L - January 22, 2009 15:30

    And if one Mac? Vyzhu softina something for vYn-dozzy ...

    [Send response]

  12. Arthur - January 22, 2009 16:54

    pomogiteee! not kachaetsya iPhone 3G iPhone1, 2_2.2_Restore.ipsw

    otkrivaetsya new page with the characters that make me

    [Send response]

  13. Arthur - January 22, 2009 16:56

    Firmware iphone 2.2 - ETA rusifitsiruet phone firmware if there is no Russian !!!!!!!!!!!!!!!!!!

    [Send response]

  14. lacoste - January 24, 2009 16:12

    tell me a program on the first line (cable and CD) long should be??? and then I have probably half an hour of waiting, what is the problem?

    [Send response]

  15. MaJIuHa - January 25, 2009 13:42

    And I still do not catch the network! Even after I ask him, left in the USB and then went Itunes found it there and still are if you know ... Give!

    [Send response]

  16. Peretz - January 27, 2009 7:12

    The author of many thanks. Made for all works.

    [Send response]

  17. Jaroslav - January 27, 2009 13:40

    I have shown on quicpwn this message that do? (firmware eror string)

    [Send response]

  18. Jaroslav - January 27, 2009 13:58

    urgent help!)

    [Send response]

  19. piton - January 27, 2009 14:31

    firmware eror string - Error firmware. Try to do all over again. Phone translate into DFU mod and ask.

    [Send response]

  20. Jaroslav - January 27, 2009 18:03

    Help! I have a problem I can not understand how! I have configured the basic network no point nastroiki инет it just is not! What should I do?! automatic settings do not feed ((

    [Send response]

  21. Jaroslav - January 27, 2009 19:54

    Help плиз! (

    [Send response]

  22. MBA - January 28, 2009 13:06

    Many thanks to the creator of the site! 2G For all that is here works! Very grateful to you! Viruses do not have anywhere else (this is about PC Suite), just shows your anti-virus - a program with the code implementation.

    [Send response]

  23. Victor - January 28, 2009 19:16

    Did firmware 2.2. Everything works except the phone. He writes that there is no network. What should I do? Give

    [Send response]

  24. Lera - 29 Jan., 2009 13:21

    Itunse After I download the update called iPhone1, 1_2.2.1_5H11_Restore.ipsw but when I include QuikPwn and select the same file is displayed Firmware error string What should I do?

    [Send response]

  25. IGOR - January 30, 2009 5:13

    30.01.09 parilis three days, but here again, and everything came out, the problem in the versions of QuickPwn 2.2-1.u I had an old, ORGOMNY RESPECT

    [Send response]

  26. RainMan - January 30, 2009 19:44

    when restoring a file from iTunes writes .. unknown error 1403
    Th .. ваще do not know ((((
    iphone 3g 2.1 itunes 8.0.2.20

    who is able to help .. please (

    [Send response]

  27. Alenka - January 31, 2009 18:48

    what to do with it???? firmware eror string write ((((and how to translate the phone in and ask defu fashion?

    [Send response]

  28. Andrew - 1 Feb., 2009 2:17

    Everything turned out super the first time, a great respect admin, so keep malodets and success to all!

    [Send response]

  29. Roustam - 2 Feb., 2009 10:02

    Hello Give me ayfon of g does not turn the screen black in the middle of an apple
    even blink ...
    what to do:??

    [Send response]

  30. Jaroslav - 2 February, 2009 17:30

    I ask the iphone 3g, everything is normal when doing dzheyl break dohozhu until the last stage and can not enter the phone. dfu mode! What to do in one iphon I have firmware 2.2.1 and another 2.2!? Help плиз!

    [Send response]

  31. Nicholas - February 3, 2009 21:49

    Give people deletantu please! My 2g 8g for its dullness zaporol phone business is that eventually the body does not see the network on the items please explain how to do via wi-fi ?????

    [Send response]

  32. Pasha - 4 February, 2009 3:51

    what to do if aytyuns gives an error 1602 ....
    this occurs after the firmware, and he chose to begin its update, and suddenly to you neizvesnaya error 1602, and the screen lit ayfona oyub wire and icon aytyunsa ??????????????????? ????????????????????????

    [Send response]

  33. Pasha - 4 February, 2009 3:56

    are waiting for help !!!!!!

    [Send response]

  34. piton - 4 February, 2009 13:51

    1601 - Gavenaya error. Try to start the reinstall iTunes, download the new Framework and the new firmware. If not, then you might try to roll back firmware.

    [Send response]

  35. Mitriy - February 6, 2009 23:20

    Carefully!
    1) Those who do not work phone:
    Proshivatsya need to proshivy 2.1 RAZLOCHENOY, then everything will be OK (Basically, the problem of official 3y, they must formally razlachivat via tuna)
    2) Who errors 1 *** try to raise the recovery mode - home and power.
    3) Trabla with vayfaem solved again benchingom butloudera

    [Send response]

  36. golod - 7 Feb., 2009 22:45

    3g put simku, but he did not see a phone operator, says the network is not found and no calls. Firmware 2.2 has already stood on it. What can I do?

    [Send response]

  37. faNtom - 8 Feb., 2009 5:41

    comply with paragraphs 1 and 2
    then run Quickpwn 22, and it gives me an error Errors encountered while performing the operation. Look at the information window for more details. Freymm worth 3.5

    [Send response]

  38. Andrew - February 10, 2009 20:34

    PODSKAZHITEE please ..!!! I ayfon it on my 2g dzhelbreyknuty firmware 2.2 everything is ...
    but I have something done and aytyuns not found ...
    I need to do to update prshivku ..?? or ..??????????
    Admin help !!!!!!!!!!!!!!! thanks in advance!

    [Send response]

  39. admin - February 11, 2009 0:07

    2 variants. First, update iTunes. If the firmware does not help it.

    [Send response]

  40. Stas - February 11, 2009 7:21

    My IPhone 3G, did pereproshivku, installed all the programs, made the launch of an administrator to connect to, well, started firmware. Then the system hung at 1 point Poltar waited an hour, you switch off your phone, then sat down on a notebook battery, is shorter than all gone out. Launched a comprehensive, included IPhone, the screen saver with cable and drive. With just did not do, it does not disappear. iTunes sees only that the IPhone and its serial number, update is not working vostanovlente ends at injection. QuickPwn it also does not see that do not know. Dear Admin, подскажи like to be in this situation.

    [Send response]

    admin Reply:

    Hung every where? When QuickPwp went to work. Then read "errors" If iTunes does not sewing, it seems easy firmware curve, or one of the two.

    [Send response]

  41. Sashka - February 13, 2009 14:11

    Hello:)
    Prompt please, if Aplle iPhone brought from Germany, a human with him to do ??????
    Russify or you can simply pereproshit ??????????? Well, I, in the sense that it was vaaaasche vporyade !!!!!

    [Send response]

  42. Fame - Feb. 13, 2009 15:30

    PC Suite 2.1 - Works with firmware 2.xx Can the right to display the files.

    ... Ceased to run ... creates a log file with an error .... And if a good program for reminders of birthdays from contacts ....

    [Send response]

  43. Russ - February 15, 2009 14:27

    Clicking on the phone iphon entirely clear. cleaned 1-hour. and just appeared "pineapple" is not responding is not nachto. wanted pereproshit. downloaded all the Prague aytyuns but did not see the phone? when connecting to the company is only charging the phone at all.

    How can it venut?

    [Send response]

  44. Misha - Feb 16, 2009 21:06

    I have a 2.2.1 firmware становил how to install 2.1 or uninstall firmware 2.2.1 pomagite

    [Send response]

  45. Misha - Feb 17, 2009 20:18

    pomagite urgently !!!!!!!!!

    [Send response]

  46. Kost - February 18, 2009 17:51

    Hello!
    I have the official iPhone 3G, firmware version 2.2 (5G33a) website Downloading firmware version 2.2 (5G77) - what firmware are different, it's normal? conflict will not arise because of this? To install Cydia and Installera I need to just run QuickPwn? or have yet to update this firmware for the following items as described above?
    Oper.sist.-Vista (there are no nuances to it? Do not block what?) Have the device only a few days, not разобрался even what's what. In advance, thanks.

    [Send response]

  47. xush - February 24, 2009 21:35

    au menya telefon zavis na yabloke .... i itunes ni naxodit telefon ... ... pamagide pajalusto

    [Send response]

    Ivan Gubchik Reply:

    Quick help. firmware via aytyuns. ones to 2.2.1 and beyond that want something and do it. I want to ask back to 2.2.
    question: is it possible?

    [Send response]

  48. Ivan Gubchik - February 24, 2009 21:54

    I have a gray body, it was 2.2, there was an installer (kachyal had seen), and sidiyu (so nothing to download). zhostko body hanging, зделал restoration and renewal through aytyuns, gone installer and sidiya. body is purely general. synchronized music and all that.